Mini-Max Plastic Ice Maker with Arrestor

MM-500 PIMB
Description:

Precision Plumbing Products has designed a plastic Ice maker box assembly that makes your installation simple and cost effective.

Because solenoid operated equipment can create destructive water hammer, by adding the Ice maker box assembly you are protecting your equipment as well as insuring against premature replacement.

The box is designed to mount to studs and recess in the wall behind the refrigerator. The water line for the ice maker is secured directly to a compression fitting.

The quarter turn ball valve faces forward to eliminate potential hose crimp, a common problem with other applications.

 

 

 

Features:
  • Also available in Metal and Fire Rated Box Options
  • LEAD FREE
Application:
SPECIFICATIONS & INSTALLATION
CONSTRUCTION:
Barrel-fabricated of type "L" hard drawn copper
CAP: Machined of free turning brass.
PISTON: Composite Material.
SEALS: EPDM Seal.
SEAL LUBRICANT: Dow-Corning Silicone Compound #111, FDA listed for use in potable water systems.
OPERATING PRESSURE: Designed to operate on all domestic and commercial systems. Normal operating pressure 0 to 80 PSI. Max spike pressure 250 PSI. For system pressures above 80 PSI consult factory.
TEMPERATURE: -40° F to + 212°  F (-4.4°  C to +100°  C)
INSTALLATION:
Boxes are supplied with a water hammer arrestor and shut off valve. Boxes include necessary mounting brackets and faceplate. Plastic boxes are molded from high impact polystyrene. (Note: Box dimensions may vary slightly from drawings).
Product Images
Can't Find what you are looking for?
Please contact us at 503-328-6705 for TECHNICAL/SALES Support.