Adaptable to Your Individual Needs
PPP Stainless Steel Hammer Arrestors are available for all types of fluid systems - water, deionized and triple distilled water, chemicals and petroleum
Finished to Your Specifications
When ordering, the expected mean spike pressure must be specified as well as the chemical make-up of the fluid in the system and the maximum temperature. Arrestors may be charged at the factory with either air or dry nitrogen per your specification.
If arrestors are to be used in systems pumping volatile fluids, it is mandatory that they are charged with dry nitrogen.
- Available for Most Types of Fluids
- Flanges ANSI Class 300
- Constructed of 316 Stainless Steel
- U.S. Patent No.3,633.62
|CAP:||Machined of 316 Stainless Steel.|
|PISTON:||Machined of 316 Stainless Steel.|
|SEAL LUBRICANT:||Dow-Corning Silicone Compound #111, FDA listed for use in potable water systems.|
Normal operating pressure 35 to 500 PSI.
|TEMPERATURE:||-40° F to + 212° F (-4.4° C to +100° C)|
PART NUMBERS & SIZING CHART
|SS-3000316FLG||16"||3" - Class 300||40|
|SS-4000316FLG||19"||4" - Class 300||40|
|SS-5000316FLG||31"||5" - Class 300||40|
|SS-6000316FLG||34"||6" - Class 300||40|
|SS-8000316FLG||39"||8" - Class 300||50|
Please contact us at 503-328-6705 for TECHNICAL/SALES Support.