Prime-Time Electronic Trap Priming Assembly Surface Mount

PTS-1320
PT-4 - PT12 Surface Mount

It's PRIME-TIME to meet your floor drain trap priming needs. This unique trap priming manifold is available in 13 through 20 opening configurations and all the contractor needs to do is simply supply the potable water and power, Precision supplies the rest...

"... Automatically maintains a constant water seal in floor drain traps."

The PRIME-TIME PRIMING MANIFOLD will supply a minimum of 2 oz. of potable water at 20 P.S.I.G. at a preset factory setting of 6 seconds every 24 hours. The entire manifold is assembled in a steel cabinet ready to be either surface, or flush wall mounted. The Priming assembly must be mounted above the finished floor.

Description:
The Electronic Priming Manifold pictured is available in a single configuration but is capable of priming from thirteen to twenty separate floor drain traps from a single control unit. The manifold is available in either 1/2" or 5/8" compression fittings.

 

 

Features:
  • Serves up to 13 - 20 Drains
  • Atmospheric Vacuum Breaker
  • Pre-Set 24 Hour Change
  • Manual Over Ride Switch
  • 120V/220V Solenoid Valve
  • 120V/220V 3/Wire Connection
  • 3/4" FNP Connection
  • Calibrated Manifold for Equal
  • Water Distribution
  • 5/8" or 1/2" Outlet Compression Fittings
Application:


SPECIFICATIONS & INSTALLATION
Cabinet: 12" x 12" x 4" NEMA-1 with Cover Plate
Cabinet Material: NEMA-1
Inlet: 3/4" NPT Female
ANSI/ASME BI.20.1
Outlet: 5/8" or 1/2" inch compression fitting. SAEJ512
Manifold: 3/4" Type "L" Copper Tubing
ASTM B88
Soldered Joints: 95-5 Lead Free Containing Lead Not IN Excess of 0.2%
Electrical Component: .2 Amp Circuit Breaker, Test Switch, Timer, Solenoid Valve marked as UL Listed
Backflow Prevention: Anti-Siphon Atmospheric Vacuum Breaker Meets Los Angeles Code, IAPMO, New York Board of Standards, ASSE 1001 and CSA.
.
INSTALLATION:
NOTE: UNIT MUST BE INSTALLED PLUMB. - MUST BE INSTALLED WITH ACCESS. - The Priming assembly must be mounted above the finished floor.
 
PART NUMBERS & SPECIFICATIONS
 
PART NUMBER Manifold Opening Manifold FIttings Dimensions
PTS-1320 13-20 1/2" or 5/8 12" x 12" x 4"
 
PTS-1320
Can't Find what you are looking for?
Please contact us at 503-328-6705 for TECHNICAL/SALES Support.