Smart-Prime Electronic Trap Primer

SMP-500-24V - SMP-500-115V - SMP-500-220V
Description:

The 115 Volt “Smart-Prime” has been designed to be a truly plug and play floor drain trap priming assembly. This electronic priming assembly will deliver 2 ozs. of potable water to four floor drain traps every 24 hours.

Water conservation was a very important aspect in the design of this product.

This priming assembly consists of:
A sub-miniature solenoid valve, with timer, a physical air gap and a 6’ electrical cord. By incorporating the Precision Plumbing Products Distribution Units this assembly is capable of priming up to four floor drain traps. Distribution Units sold separately.

 

 

Features:
  • A sub-miniature solenoid valve
  • Physical air gap
  • 6' electrical cord with three prong outlet connection.
Application:
NOTE: For the 220V and 24V options, the power supply cord will require a hard wire installation as it will not have an outlet connection.
INSTALLATION:
The Trap Primer valve is required to be a minimum of 12" off the finished floor before a 90 degree elbow can be installed. The furthest distance of makeup line is approximately 20' to the floor drain. ( Consult Local Code requirements.) May be installed in new or existing plumbing systems with a standard pipe tee. WIRING MUST BE DONE IN ACCORDANCE WITH NATIONAL, STATE AND LOCAL ELECTRICAL CODE.
Smart-Prime Diagram
SMART-PRIME SMP-500-115V
 
PART NUMBERS & SPECIFICATIONS
 
PART NUMBER Voltage
SMP-500-24V 24
SMP-500-115V 115
SMP-500-220V 220
 
Accessories
Can't Find what you are looking for?
Please contact us at 503-328-6705 for TECHNICAL/SALES Support.